To Next PageTo Next Page
Need help?Do you have a question about the BodyCraft XFT and is the answer not in the manual?
Essential safety guidelines including consulting a physician, exercising care, proper assembly surface, and cleaning.
Connect base legs to the base frame using specified bolts and washers, orienting the pulley holder correctly.
Securely tighten the specified bolts on the base frame assembly after initial loose assembly.
Loosely connect a main upright frame to the base frame using specified bolts, washers, and nuts.
Remove bolts from connector frame, rotate steel plates, and install connector frame to the main upright frame.
Slide the main upright frame into the base frame until mounting holes align for connection.
Fasten the main upright frame to the base frame using specified sunken head bolts, washers, and nylon nuts.
Connect the top frame to the main upright frames, routing counter weight cables through pulley holders.
Loosely fasten the top frame to the upright frames using specified hex bolts, washers, and nylon nuts.
Mount pulleys to the top frame, routing cables over them and securing with hex bolts and nylon nuts.
Install linear guide rods by sliding rubber cushions onto them and resting them on rod holders.
Loosen screws, angle rod, slide through upper holder, and position above connector frame opening.
Warning regarding the heavy counter weight cable requiring assistance during assembly to prevent injury or damage.
Guidelines for cleaning the frame, upholstery, and performing general inspections for upkeep.
Specifies that the warranty is valid only for purchases made within the USA and Canada.
Details warranty validity based on purchase date, owner, and non-transferability.
Requires product registration within 30 days or proof of purchase to validate the warranty.
Lists conditions and actions that void the product warranty, such as misuse, neglect, and improper maintenance.
Outlines BODYCRAFT's option to repair or replace defective parts at no cost, with potential shipping charges.
Specifies lifetime warranty for frame and parts for residential use.
Specifies 10-year frame and 2-year parts warranty for commercial use.
Excludes normal maintenance, cosmetic wear, and accessories not in original packaging from warranty coverage.
General| Type | Functional Trainer |
|---|---|
| Frame | Heavy-gauge steel tubing |
| Cable Ratio | 2:1 |
| Pulley System | Adjustable pulleys |
| Frame Material | Steel |
| Warranty | 10 years parts |
