BodyGuardz Pure 2 With Install Guide
INSTALLATION INSTRUCTIONS
Replacement information: BodyGuardz warrants to the original purchaser that if this product proves defective in materials or workmanship for 1 year from the date of
proof of purchase, it will be subject to the terms of this warranty and may be replaced at BodyGuardz option.
Replacement limitations and exclusions: When ordering a replacement, you are acknowledging that you will return your original BodyGuardz product within 60 days.
BodyGuardz policy states that if the original protector is not returned in this time, customers will be charged full price for the replacement protector. You may also be
asked to provide proof of purchase. Shipping and handling fees apply. Returning damaged screen protector is required and return postage may apply.
Warranty information: This warranty does not apply to any product which has suered through normal wear and tear, accident, alteration, improper installation,
physical abuse, misuse or neglect. Damage resulting from an act of God, including but not limited to re, ood, earthquake and other natural disasters will be excluded.
This limited warranty is in lieu of all other warranties, express or implied either in fact or by operations of law, statutory or otherwise, including, but not limited to any
implied warranty of merchantability or tness for a particular use. In no event, whether based in contract or tort shall BodyGuardz be liable for incidental, consequential,
indirect, special, or punitive damages of any kind resulting from the use of this product. In no event shall BodyGuardz be liable for damage in excess of the purchase
price. BodyGuardz and the BodyGuardz logo are registered trademarks of NLU Products®, LLC dba BodyGuardz.
WARNING: This product is made of glass and should be handled with care if broken.
bodyguardz.com
1. Adhesive Release Liner
A clear lm covering the adhesive side of the protector.
2. Glass Protector
The thin, ultra-strong glass that safeguards
your device screen.
3. Cap Sheet
A clear lm to shield the glass and
help with install alignment.
4. Installation Guide
A plastic guide that precisely aligns the
glass protector to your device.
5. Cleaning Kit
An alcohol wipe, a microber cleaning cloth, and dust
removal stickers to prepare your screen for installation.
1
2
3
4
5
70% Isopropyl Alcohol
Alcool Isopropilique 70%
Alcohol
wipe.
Préps d’alcool.
Dust Removal
Sticker.
Dust Removal
Sticker.
Installation Kit
Instructions on reverse
Installation Instructions
Place installation guide around the
device, pressing down for a snug t
around the phone.
21
43
While holding the protector, peel o
the release liner to expose the adhesive.
Then, use the installation guide, camera,
and sensors to align the protector
on the device.
Use the provided alcohol wipe to clean your
screen thoroughly. Wipe away any streaks
with the microber cleaning cloth. Gently tap
the dust removal sticker over the surface of
the screen to remove any dust particles.
Once aligned, run your nger rmly down the
middle of the screen to begin adhesion. Then,
peel o the cap sheet. Finally, remove the
installation guide by lifting from the bottom.
Install Video: bodyguardz.com/install
Any remaining bubbles should disappear within
24-48 hrs.
Dust removal after installation:
Use the provided dust removal stickers to pull out
any trapped dust. Carefully lift up the corner of
the glass closest to the dust particle and place the
sticky side of the strip against the piece of dust.
Then, pull dust sticker straight out.
To remove protector:
Carefully lift one corner and slowly pull the glass
o your device.
Register now to get free
replacements for the life
of your device.
bodyguardz.com/register
This product qualies for
Replacements fullled by retail partners may carry
additional fees and conditions.
To Next Page
Need help?
General
