SM(SE)17 / 27 / 37 SERIES INSTRUCTION MANUAL
I1248
DISPLAY FUNCTIONS
ITEM DESCRIPTION
TIME Count up – No preset target, Time will count up from 00:00 to maximum
99:59 with each increment is 1 minute.
Count down - If training with preset Time, Time will count down from reset to 00:00.
Each preset increment or decrement is 1 minute between 00:00 to 99:00.
SPEED
Displays current training speed. Maximum speed is 99.9 KM/H or ML/H.
DISTANCE
Accumulates total distance from 0.00 up to 99.9 KM or ML. The user may preset target
distance data by using UP/DOWN button. Each incensement or decrement is 0.1KM or ML
between 0.00~99.9.
CALORIES Accumulates calories consumption during training from 0 to maximum 9999 calories.
(This data is a rough guide for comparison of different exercise sessions
which can not be used in medical treatment.)
PULSE
User may set up target pulse from 0 - 30 to 230; and computer buzzer
will beep when actual heart rate is over the target value during workout.
RPM
Displays the Rotation Per Minute. Display range 0~999
WATTS
Workout power consumption
Range 0 ~ 999
In Watt constant mode, computer will remain preset watt value (setting range 0~350)
MANUAL
PROGRAM
USER PROGRAM User creates resistance level profile.
H.R.C. Target HR training mode.
WATT PROGRAM WATT constant training mode.
KEY FUNCTION
ITEM DESCRIPTION
Up (Encoder)
Increase resistance level
Down (Encoder)
Decrease resistance level
Setting selection.
Mode / Enter
Confirm setting or selection.
Reset
Hold on pressing for 2 seconds, computer will reboot and start from user setting.
Reverse to main menu during presetting workout value or stop mode.
Start/ Stop
Start or Stop workout.
Recovery
Test heart rate recovery status.
Body fat
In stop mode, press it for body fat measurement.
To Next Page
Loading...
