OPERATION:
POWER ON
Plug in power supply, computer will power on and display all segments on LCD for 2 seconds (Drawing 1).
Drawing 1
Then enter into User data setting. Use UP or DOWN (Encoder) to select U1~U4 (Drawing 2), then set SEX, AGE, HEIGHT, WEIGHT
(Drawing 3) and confirm by pressing MODE / ENTER button. When finishing user data profile, Console come to main menu.
Drawing 2 Drawing 3
WORKOUT SELECTION
Use UP or DOWN (Encoder) to select workout Manual (Drawing4)Program (Drawing 5) User Program (Drawing 6) H.R.C.
(Drawing 7) Watt(Drawing 8).
Drawing 4 Drawing 5
Drawing 6 Drawing 7
Drawing 8
Manual Mode
Press START in main menu may start workout in manual mode.
1. Use UP or DOWN (Encoder) to select workout program, choose Manual and press MODE / ENTER to get into.
2. Use UP or DOWN (Encoder) to preset TIME (Drawing 9), DISTANCE (Drawing 10), CALORIES (Drawing 11), PULSE (Drawing 12)
and press MODE / ENTER to confirm.
3. Press START/STOP keys to start workout. Use UP or DOWN (Encoder) to adjust load level. Load level display in WATT
window, no adjusting for 3s, it will switch to display WATT (Drawing 13).
4. Press START/STOP keys to pause workout. Press RESET to reverse to main menu.
To Next Page
Loading...
