BODYMAX E80 - Page 17

Drawing 9 Drawing 10
Drawing 11 Drawing 12
Drawing 13
Program Mode
1. Use UP or DOWN (Encoder) to select workout program, choose Beginner mode and press MODE / ENTER to get into.
2. Use UP or DOWN (Encoder) to select program 1~12 (Drawing 14) and press MODE / ENTER to get into.
3. Use UP or DOWN (Encoder) to preset TIME.
4. Press START/STOP key to start workout. Use UP or DOWN (Encoder) to adjust load level.
5. Press START/STOP key to pause workout. Press RESET to reverse to main menu.
Drawing 14
User Program Mode
1. Use UP or DOWN (Encoder) to select workout program, choose User Program mode and press MODE / ENTER to get into.
2. Use UP or DOWN (Encoder) to create user profile (Drawing 15). There are total 20 column, user can adjust each column load
level. User can hold MODE / ENTER 2 seconds to quit during setting.
3. Use UP or DOWN (Encoder) to set TIME.
4. Press START/STOP key to start workout. Use UP or DOWN (Encoder) to adjust load level.
5. Press START/STOP key to pause workout. Press RESET to reverse to main menu.