Replacement Parts
Consumable Spares
The V250 contains a pre filter and combined filter. These
should be replaced when instructed to do so by the V250
system (see section 6 for replacing the filters)
To maintain performance it is important that the filters are
replaced with identical BOFA filters. To re-order please refer
to the Filter number printed on the filter installed in your
extraction unit.
Maintenance Protocol
Users can record changes in filter change intervals on the
table below.
Pre Filter Combined Filter
Filter disposal
The combined filter is manufactured from non-toxic
materials. Filters are not re-usable, cleaning used filters is
not recommended. The method of disposal of the used
filters depends on the material deposited on them.
For your guidance
Deposit EWC
Listing*
Comment
Non
Hazardous
15 02 03 Can be disposed of as non-
hazardous waste.
Hazardous 15 02 02M The type of hazard needs to
be identified and the
associated risks defined. The
thresholds for these risks
can then be compared with
the amount of material in
the filters to see if they fall
into the hazardous category,
if so, the filters will need to
be disposed of in line with
the local/national
regulations.
*European Waste Catalogue