Operation
Turning extraction unit On
The V250 features a fused IEC inlet for the mains cable as
well as a main isolation switch. The unit can be powered on
and off by pressing the red rocker switch to the right hand
side.
Remote Speed Control Optional Extra (230V ONLY)
A remote to control the motor speed can be purchased as
part of the V250 range at the ordering stage.
This allows the user to manually set the airflow from the
V250 system. Over time as the filters get blocked it is
advised that the motor speed be increased to ensure the
unit maintains good airflow.
To increase the airflow, press and hold the ‘up’ arrow. The
number of glowing blue LEDs will increase as the motor
speed is increased.
To decrease the airflow, press and hold the ‘down’ arrow. As
the motor speed slows down, the number of glowing blue
LEDs will decrease.
Main Isolation Switch
Mains Inlet
To Next Page
Loading...
