Safety Instructions
Warning and Information labels
The following listing details labels used on your V250
extraction unit.
Goggles, Gloves & Mask Label
Location: Front face of filter.
Meaning: Goggles, Gloves and Masks should be worn while
handling used filters.
Do Not Cover Label
Location: Bottom panel.
Meaning: Do not cover any louvers or holes adjacent to the
label.
Electrical Danger
Location: Bottom Panel
Meaning: Removal of panels with this label attached will
allow access to potentially live components.
Warning Label
Location: Next to release clips.
Meaning: Power should be isolated before the panel with
this label attached is opened/ removed.
Serial Number Label
Location: Next to mains inlet.
Meaning: This label contains a variety of information about
the extraction unit, including.
• Company name, Address & Contact number
• Extractor model
• Unit serial number
• Operating voltage range
• Maximum current load
• Operating frequency
• Year of Manufacture
• Relevant approval markings/ logos
PLEASE NOTE: If the equipment is used in a manner not
specified by the manufacturer, the protection provided by
the equipment maybe compromised.
Fire Risk Warning
In the very rare event that a burning ember or spark is
drawn into the fume extraction unit, it may be possible that
the filters will ignite.
Whilst any resultant fire would typically be retained within
the fume extraction unit, the damage to the extractor
could
be significant. It is therefore essential to minimise the
possibility of this occurring by undertaking an appropriate
Risk assessment to determine:-
a). Whether additional fire protection equipment should be
installed.
b). Appropriate maintenance procedures to prevent the risk
of build-up of debris which could potentially combust.
This unit should not be used on processes where sparks
could occur, with explosive dusts and gases, or with
particulates which can be pyrophoric (can spontaneously
ignite), without implementation of additional precautions
It is essential that nozzles or other extraction/ fume capture
devices and hoses/pipework are cleaned regularly to prevent
the build-up of potentially ignitable debris
To Next Page
Loading...
