Boge airtelligence provis 3 User Manual (English)

Questions and Answers:

A
ahawkinsAug 12, 2025
What to do if an event occurs at airtelligence provis 3 (error number 500 to 699) in Boge Control Unit?
- C
  Claire HayesAug 12, 2025
  If an event occurs in your Boge Control Unit airtelligence provis 3 (error number 500 to 699), you should first call up the event information using the line symbol on all view levels or directly in the affected compressed airnet with the event display. Then, find and eliminate the cause of the message by checking communication settings or settings on airtelligence provis 3 or controls and modules. If necessary, contact Boge service personnel.
W
Wesley WileyAug 18, 2025
How to acknowledge event/message at the Boge Control Unit slave control?
- C
  Carla AyalaAug 19, 2025
  To acknowledge an event or message on the Boge Control Unit slave control, use the airtelligence provis 3 event display. Tap or click the line symbol to the left of the event, and then use the button that appears to acknowledge the event or message.
J
Jody LongAug 27, 2025
What to do if the acknowledgment of one or more events can only be carried out after login in Boge airtelligence provis 3 Control Unit?
- C
  Calvin YoungAug 27, 2025
  To acknowledge one or more events on the Boge Control Unit, you must log in first. You can acknowledge several events or messages simultaneously via area (4) using the button in the event display. It is recommended to acknowledge warnings, service messages and faults individually.
N
Nicole AdamsSep 2, 2025
What to do if event occurs in slave controls or modules (Error No. < 500) in Boge airtelligence provis 3 Control Unit?
- D
  durandanaSep 3, 2025
  If an event occurs that causes a message type to appear in the Boge Control Unit slave controls or modules (Error No. < 500), call up the event information using the line symbol on all view levels or directly in the affected compressed airnet with the event display. Locate and rectify the cause of the message on the affected component (compressor / receiver / equipment). If necessary, contact Boge service personnel.

Boge airtelligence provis 3 Specifications

General

Manufacturer	Boge
Type	airtelligence provis 3
Category	Control Unit
Voltage	24 V DC
Protection Class	IP20
Storage Temperature	-20 °C to +70 °C
Relative Humidity	5% to 95% (non-condensing)

Related product manuals

Boge airtelligence PROVIS

Boge airtelligence provis 3 User Manual

Table of Contents

Questions and Answers:

Boge airtelligence provis 3 Specifications

Related product manuals