Need help?Do you have a question about the Boge C 20 L and is the answer not in the manual?
General| Nominal Motor Power | 1.5 kW |
|---|---|
| Maximum Pressure | 10 bar |
| Sound Pressure Level | 72 dB(A) |
| Voltage | 230 V |
| Tank Capacity | 20 l |
| Type | Piston |
Provides comprehensive safety guidelines for operating, maintaining, and repairing the compressor.
Details critical safety rules and precautions for the safe operation of the compressor.
Outlines essential safety precautions for all maintenance and repair activities performed on the compressor.
Covers general accident prevention regulations that must be observed during compressor operation.
Specifies the designated purpose of BOGE compressors for air compression and prohibited applications.
Highlights dangerous practices and scenarios to avoid, including directing air at persons or operating in explosive atmospheres.
Presents detailed technical specifications for C 10 L, C 15 L, and C 20 L compressor assemblies.
Describes how the compressor is controlled, including network pressure and operating states.
Outlines the safety and monitoring devices that ensure operational safety and fault detection.
Describes the safety valve's function in preventing over-pressurization and its operation.
Explains the safety temperature limiting device that switches off the compressor if critical temperatures are reached.
Details how the drive motor is monitored using PTC resistors for safety and operational checks.
Provides instructions for safe transport and storage of the compressor to prevent damage.
Specifies installation, maintenance conditions, and application requirements for compressor rooms.
Outlines fire protection requirements for compressor rooms, including material classes and storage of flammable liquids.
Explains how to safely dispose of condensate, emphasizing oil-water separation and local regulations.
Covers the steps and precautions for installing the compressor unit.
Details the procedure for safely connecting the compressor to the electrical power supply.
Highlights the customer's responsibility to provide a mains disconnecting device for safety.
Guides through the process of commissioning the compressor after installation.
Emphasizes checking the drive motor's rotational direction before initial startup to prevent damage.
Lists common operating faults, their possible causes, and recommended rectification measures.
Troubleshooting for no quantity delivered, no pressure build-up, and low max pressure.
Addresses common causes and solutions for the compressor system failing to start.
Troubleshooting steps when the safety valve activates due to over-pressure.
Provides critical safety instructions that must be followed before and during any maintenance work.
Details the schedule and procedures for regular maintenance tasks to ensure optimal compressor performance.
Details the procedure and intervals for changing the compressor oil, including building pressure cushion.
To Next Page
