Need help?Do you have a question about the Boge C 20 N and is the answer not in the manual?
General| Nominal motor power | 1.5 kW |
|---|---|
| Maximum pressure | 10 bar |
| Sound pressure level | 72 dB(A) |
| Voltage | 230 V |
| Speed | 1400 rpm |
| Tank Capacity | 20 l |
| Type | Piston |
Safety instructions for compressor operation, electrical hazards, owner obligations, and personnel requirements.
Warnings regarding risk of injury from cooling fan, noise, and high pressure air.
Dangers associated with electrical work, safety measures, and professional requirements.
Owner's responsibilities for compressor operation, maintenance, and workplace safety.
Safety procedures before, during, and after maintenance or repair work.
Detailed technical specifications for C 16 N...C 30 N series, part 1.
Detailed technical specifications for C 16 N...C 30 N series, part 2.
Detailed technical specifications for C 16 F N...C 30 F N series, part 1.
Detailed technical specifications for C 16 F N...C 30 F N series, part 2.
Explanation of compressor control, operating states (load, idling, standstill), and operating modes.
Description of intermittent and continuous operation modes based on operating states.
Overview of safety devices like temperature limiter, safety valve, and motor monitoring.
Safety precautions and procedures for connecting the compressor to the power supply.
Steps for commissioning, including voltage checks, lead connection, and safety procedures.
Verifying installation, checking drive direction, and how to change it.
Table listing common compressor faults, their possible causes, and rectification measures.
Crucial safety precautions for performing maintenance work on the compressor.
Detailed steps to follow before and after maintenance to ensure safety.
Procedure for cleaning or changing the suction filter, including safety warnings.
Procedure for checking the oil level and instructions for topping up the oil.
Procedure for changing the oil filter, including warnings about hot surfaces.
Procedure for changing oil separators, including warnings about maintenance intervals and hot oil.
Instructions for oil change, including intervals, conditions affecting service life, and pressure cushion building.
Importance of safety valve function check, interval, and who should perform it.
To Next Page
