BRIDGING INPUT - BRG1R
Daisy Chain Multiple Amplifier Inputs
• Gain/Trim control
• Ground isolated input to eliminate ground loop
• Input signal available at buffered output
• Priority assignable
• Variable ducking level when muted
• Fade back from mute
• Buffered output not muted
• Bus assignable
• RCA input and output connector
MONO AUX INPUT - MAX1R
Unbalanced Mono Input
• Gain/Trim control
• Bass & Treble controls
• Gate feature mutes lower priority modules
• Mutable by higher priority modules
• Variable ducking level when muted
• Fade back from mute
• Bus assignable
• RCA connector
BALANCED INPUT - BAL2S
Stereo, Balanced Input
• Stereo, high-impedance, electronically balanced inputs
• Professional-quality, low noise performance
• Selectable gain of 0 or 18 dB
• Compatible with telephone system page ports
• Mutable by higher priority modules
• Variable ducking level when muted
• Fade back from mute
• Screw terminal connections
STEREO AUX INPUT - SAX1R
Unbalanced Stereo Input
• Gain/Trim control
• Bass & Treble controls
• Gate feature mutes lower priority modules
• Mutable by higher priority modules
• Variable ducking level when muted
• Fade back from mute
• Stereo-to-mono summing option
• Bus assignable
• RCA connectors
MICROPHONE INPUTS - MIC2S, MIC2X
Low-impedance, Electronic-balanced Microphone Inputs
• Gain/Trim control
• High Cut/Low Cut controls
• Enhance control
• Noise gate w/Threshold control
• Limiter w/Threshold control
• 24V Phantom power
• Priority & Bus assignable
• Screw terminals (MIC2S);
XLR connector (MIC2X)
Bogen’s advanced plug-in input modules provide a wide
range of functions to support a variety of applications.
(Shipping weight: 1 lb. each)
Input Modules (Output Modules on Page 40)
MICROPHONE INPUTS - MIC1S, MIC1X
Low-impedance, Transformer-balanced Microphone Inputs
• Gain/Trim control
• Bass & Treble controls
• Noise gate w/Threshold
& Duration control
• Limiter w/Threshold control
• 24V Phantom power
• Priority & Bus assignable
• Balanced, transformer-isolated
• Screw terminals (MIC1S);
XLR connector (MIC1X)
TRANSFORMER-BALANCED INPUT - TBL1S
Transformer-Balanced AUX Input
• Gain/Trim control
• Bass & Treble controls
•
Transformer-isolated, dual-impedance, line-level input
• Variable ducking level when muted
• Mute send & receive
• Fade back from mute
• Mute send threshold & duration adjustments
• Priority & Bus assignable
• Pluggable screw terminal connections
TONE GENERATOR - TNG1S
Multiple Tone Generator Input
• Level control
• Select 4 of 8 tones to trigger
• Burst/steady, slow whoop, siren, mechanical bell,
Klaxon, night ringer, double chime, & doorbell tones
• Momentary & continuous playback modes
• Microprocessor-controlled
• Priority assignable
• Mute send & receive
• Screw terminal trigger connections
LINE/MIC INPUTS - LMM1S, LMR1S
Actively Balanced Emulated Transformer Inputs
• Input level controlled
by remote panel or direct
voltage (LMR1S)
• Wall Plate Control included
(with LMR1S only)
• Limiter with LED activity
indicator (LMR1S)
• Line/MIC gain switch
• Gain/Trim control
• Bass & Treble controls
• Noise gate w/threshold control
• Fade back from mute
• 24V phantom power
• Priority & bus assignments
• Screw terminal input
• Mutes lower priority modules
• Mutable by higher priority
modules
Accessories
MA3
Module
Adapter
Adapts Modules for use
with D-Series, WMA,
and DPA Amps
Accessories
PRS48
48V DC
Power
Supply
TELEPHONE INPUT - TEL1S
Interfaces to Telephone System's Loop Start/Ground Start Trunks or Paging
Ports
• Loop start or ground start trunk interfacing
• Dry loop interface to paging ports
• Audio-activated paging in dry loop
• Gain/Trim control; Noise gate & Limiter
• Mutes lower priority modules
• Mutable by higher priority modules
• Bus assignable & Transformer-isolated
• Screw terminal connections
www.bogen.com
39
AMPLIFIERS
ADVANCED INPUT MODULES
LMM1S
MIC1S MIC1X
MIC2S MIC2X
LMR1S
with Remote
Volume Control
To Next Page
Loading...
