Need help?Do you have a question about the Bogen TPU100B and is the answer not in the manual?
General| Power Output | 100W |
|---|---|
| Power Requirements | 120V AC, 60Hz |
| Input Impedance | 10k ohms |
| Output Impedance | 8 Ohms, 25V, 70V |
| Outputs | Screw terminal block |
| Total Harmonic Distortion (THD) | <1% |
Lists the items included with the Telephone Paging Amplifier unit.
Provides initial guidance for understanding the manual and product.
Details general mounting advice, heat considerations, and ventilation requirements.
Instructions for securely mounting the amplifier to a wall.
Covers methods for rack mounting different TPU amplifier models.
Connects a background music source to the amplifier.
Details connecting a low-impedance dynamic microphone.
Describes connecting the 600-ohm, dry-loop telephone page signal.
Explains how to connect signals to activate the night ringer.
Information on connecting multiple amplifiers for increased output power.
Details speaker output connections for various impedance and voltage ratings.
Instructions for connecting a WMT1A for a balanced telephone-level output signal.
Explains the function of the POWER and PEAK LEVEL indicators.
Details the function of Audio Enhancement, Treble, Bass, and Vox Sens controls.
Describes how to adjust Ringer, Music, Microphone, and Telephone volume levels.
Explains ALC functionality and the adjustment procedure for output limiting.
To Next Page
