3
PREPARATION BEFORE RIDING
1. Please read this manual carefully in order to completely familiarize yourself with the electric
bike, its performance, functions and requirements.
2. Check the electric bike completely, including the brakes, tires, handlebars, folder and
detachable parts, to ensure the product is in good working order.
3. Check the electric circuit to ensure the battery level is sufficient to go on the road. If not, the
battery should be fully charged.
4. Check if the braking system and the brake-power-off functions are in good working order. If
not, do not use the bike and refer to our after sales customer service immediately.
5. The steerer tube should be inserted at the minimum depth (safety mark) of the stand tube,
fasten it with the quick release lock (Picture 1).
6. The seat tube height can be adjusted to your own requirements, however it should be
inserted at a minimum depth (safety mark ), fasten the seat tube with the quick release lock
(picture 2).
lock seat post
To Next Page
Loading...
