boho office BASIC LINE SQ650 - Page 23

23
DEUTSCH
i
Function serves to limit the high point of desk - once set - cannot normally be moved
above the set stop point.

Adjust the height to the position where the stop point should be set.

1. Press and hold the key „S“
2. Shortly after, press and hold key „3“
3. Hold both pressed for ca. 3 secs
The display conrms the setting
Attention ! Favourite positions below the stop are deleted.
>> Set window stop <<
This function deletes all stop points

Adjust the height to the position where the stop point should be set.

1. Press and hold the key „S“
2. Shortly after, press and hold key „2“
3. Hold both pressed for ca. 3 secs
The display conrms the setting
>> Delete stop points <<
1. Press and hold the key „S“
2. Shortly after press „UP“ and hold
3. Hold both pressed for ca. 3 secs
4. Sobald das Display anfängt zu blinken, lassen Sie bitte die Tasten los
Increase or decrease value.
(The rst digit may not need to be changed)
Press the „S“ key - the second digit starts ashing.
Press „Up or Down“ to change the value.
Press the „S“ key - the third digit starts ashing.
Press „Up or Down“ to change the value.
Press the „S“ key to complete the operation.
>> Adjusting the displayed height <<
Additional settings
Installation of the memory control