Bold Flame PRUNA Series - Operating Instructions

Operating Instructions
7
Heater Switch
I
O
• The HEATER switch turns the heater ON and OFF. This
switch must be lit for the heater function to work.
Power Switch
I
O
• This switch turns the main power ON and OFF.
• The switch will be illuminated when the heater is ON.
• This switch needs to be ON in order to use the heater.
• Press Standby button " " to turn ON /
turn OFF all function.
Thermostat
• To adjust the temperature to your individual
requirements, turn the thermostat dial to the right
(clockwise) to increase the temperature and to the left
to decrease the temperature. This thermostat control
dial can only be used while the power switch is in " "
position and the heater is turned on. When the heater
reaches the desired temperature, the heat will turn
off. When the temperature drops below the selected
temperature, heat will restart again.
Remote Control
Remote control can only be used while the power switch
are in " " position.
I
O
I
I
O
O
I
O
I
O
I
O
I
O
I
O
I
O
ASSEMBLY & OPERATIONS