LITE
Safety Information
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS
COULD RESULT IN FIRE OR ELECTRIC SHOCK
Faulty installation, improper earthing, incorrect operation
and maintenance of electrical equipment are always
sources of danger. Please take care of the
following steps
Make sure all electrical equipment's are well grounded to avoid any possibilty
of electric shock.
Use the correct cable size to avoid overheating, corrosion & breakdown. Do
not use worn, damaged, or non-Insulated cables.
Make sure all electrical connections are clean, dry, insulated and tightly
secured.
Moisture and water can conduct electricity. To prevent shock, it is advisable
to keep work areas and equipment dry at all times. If your device gets wet,
use the charging point carefully.
Always plug & unplug power cords slowly & safely.
Keep charging point out of reach from children without adult supervision
Keep the socket flip closed when the device is not in use to avoid any entry of
foreign element which may damage the device.
To Next Page
Loading...