What to do if my BOMANN Ventilation Hood is not working?
If your BOMANN Ventilation Hood isn't working, first ensure it's properly connected to the mains power by checking the plug and the fuse. Also, verify that you've selected a power level setting.
Why is my BOMANN DU 623.2 Ventilation Hood not running efficiently?
If your BOMANN Ventilation Hood isn't running efficiently, make sure you've selected the correct power level. Also, check and clean the grease filter. If you are using recirculation mode, verify that the carbon filter is correctly installed. Finally, ensure the air outlet is clear if you're using extraction mode.
What to do if oil is dripping from my BOMANN Ventilation Hood?
If oil is dripping from your BOMANN Ventilation Hood, it's likely that the grease filters are dirty. Clean the grease filter to resolve this issue.
General| Colour | Stainless Steel |
|---|---|
| Number of engines | 1 |
| Number of speed settings | 3 |
| Lighting | Yes |
| Number of bulbs | 2 |
| Grease filter type | Aluminium |
| Power Consumption | 125 W |
| Filter Type | Aluminium grease filter |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Width | 600 mm |
| Depth | 500 mm |
To Next Page
