EasyManua.ls Logo

BOMANN EBK 962 - Cleaning and Maintenance; Troubleshooting

BOMANN EBK 962
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Use a quick cooker to clearly reduce the cooking
time and save energy.
After boiling or frying, switch off the used cooking
zones to a smaller power level.
Use the residual heat of the pan, the pot and the
food. Switch off the cooking zones 5-10 minutes
before cooking time.
Cleaning and Maintenance
WARNING:
Always switch off the appliance completely before
cleaning and maintenance work and disconnect it
from the power supply if necessary.
Allow the unit to cool down before cleaning.
Do not use steam cleaners for cleaning the appli-
ance; moisture could enter electrical components.
Risk of electric shock!
Hot steam could damage
the plastic parts.
Never use flammable substances, such as thin-
ner, kerosene, gasoline or acids for cleaning.
The unit must be dry before restarting operation.
CAUTION:
Do not use a wire brush or other sharp, abrasive
items.
Do not use harsh abrasive cleaners or sharp met-
al objects for cleaning. The glass surface can be
scratched or destroyed.
Always consider the application and safety notes
of the detergent.
Cleaning the hob
Clean the surface from food remains when it’s still
warm using a moist cloth or tissue.
Wash the hob using a soft sponge and some wa-
ter, then wipe dry with a soft cloth.
Cleaning agent for glass-ceramics surfaces:
use suitable cleaning products available at special
departments of department stores.
Staining Cleaning method Cleaning tools
Dirt has
accumu-
lated
Use warm water
and a sponge to
rub dry
Special clean-
ing sponge for
glass ceramic
Pools and
lime depo-
sits
Apply warm vine-
gar and wipe off
with a dry cloth or
use special clean-
ing agent
Special clean-
ing agent for
glass ceramic
Sugar,
melted
aluminum,
or plastic
Remove by using
a glass ceramic
scraper
Special clean-
ing agent and
scraper for
glass ceramic
Troubleshooting
Before you contact an authorized specialist
In the case of a few malfunctions, the hob will automat-
ically go into safety mode and the respective error
code will be shown:
Problem Possible cause / What to do?
Unit does not
work
Power supply is disconnected.
Check the main fuse.
The control panel
does not react or
only very difficult
Child safety lock is activated.
Clean and dry the operating
surface.
Crackling noises
during cooking
Can be caused by the cookware
structure (layers of different
metals).
Ventilation noise
after switching off
Due to overheating protection
the fan continuously run for
some time.

Related product manuals