8
of the appliance. Do not lead it over sharp edges
or corners.
Connection plan
Permissible connection methods
CAUTION:
The protective ground of the mains
MUST
be con-
nected to the
PE
terminal.
NOTE:
L1, L2: Phase – N: Neutral –
PE: Protective ground
Connection point 3 and 5 are blind connections.
220-240V 1N~ 50/60Hz 380-420V 2N~ 50/60Hz
H05 VV-F3G 2.5mm² H05 VV-F4G 2.5mm²
H05 GG-F4G 2.5mm²
H07 RN-F4G 2.5mm²
Startup / Operation
Selecting the cookware
CAUTION:
The cooking surface and the base of the cookware
must always be clean and dry.
When choosing the cookware, pay attention to the
following
Wrong!
Cookware is too small.
Heat loss!
Cookware ground uneven.
Poor heat transfer!
Lid does not close properly.
Heat loss!
Correct! To save time and energy!
Diameter of the cookware corresponds
with the diameter of the hob.
The cookware base is fully resting, and the lid closes
properly.
General information to the operation
The appliance is operated via touch buttons at the
control panel.
The buttons react to the slightest touch. You do
not need to apply any pressure.
The appliance reacts best when touching the
buttons with the fingertips and with dry hands.
Once a touch has been registered, a brief beep
will sound.
Ensure that the control panel is always clean and
dry. Objects or a small liquid film can impair oper-
ation.
Control panel
1
On/Off
Button to switch the unit on and off.
2
Timer
Button to select the timer functions.
3
Power- / Timer control
Button to adjust the power level and the timer:
increase /
decrease
4
Timer-Display
Displays the timer setting.
5
Child safety lock
Button to activate/deactivate the child lock.
6
Cooking zone selection
Button to select the cooking zone.
7
Cooking zone display
Displays the setting of the power level for the respec-
tive cooking zone.
To Next Page
Loading...
