Why are plates not clean in my BOMANN GSPE 7413 TI?
If plates and flatware aren't getting clean in your BOMANN Dishwasher, try selecting a stronger wash program. Also, ensure that large dishes are not blocking the spray arms.
Why is my BOMANN Dishwasher not drying dishes properly?
An unsatisfactory drying result in your BOMANN Dishwasher may be due to improper loading, removing dishes too soon, selecting the wrong program, or using cutlery with a low-quality coating.
What to do if water is not drained off from BOMANN GSPE 7413 TI Dishwasher?
If water is not draining from your BOMANN Dishwasher, check the drain hose for blockages. Also, inspect the filters and the kitchen sink to ensure they are not clogged.
Why are there spots and filming on dishes in my BOMANN Dishwasher?
Spots and filming on dishes from your BOMANN Dishwasher can occur due to extremely hard water, low inlet temperature, overloading the baskets, improper loading, old or damp detergent, or incorrect detergent dosage.
How to stop foaming in my BOMANN GSPE 7413 TI?
To prevent foaming in your BOMANN Dishwasher, use only special dishwasher detergent. If foaming occurs, open the door and let the suds evaporate. Add a bit of cold water to the tub and start a short rinse cycle to drain the water.
How to remove white film from inside BOMANN GSPE 7413 TI Dishwasher?
To clean white film caused by hard water minerals from the inside of your BOMANN Dishwasher, use a damp sponge with dishwasher detergent. Remember to wear rubber gloves.
Why does my BOMANN GSPE 7413 TI Dishwasher have staining of glassware?
If you're experiencing staining of glassware in your BOMANN Dishwasher, use less detergent with soft water and select the shortest rinse cycle to clean and rinse glassware.
What to do if my BOMANN GSPE 7413 TI Dishwasher is foaming?
To prevent foaming in your BOMANN Dishwasher, only use special dishwasher detergent. If foaming occurs, open the dishwasher door to let the foam escape. If necessary, add some cold water to the tub and start a rinse cycle to drain the water.
How to remove black or grey marks from BOMANN GSPE 7413 TI?
To remove black or grey marks from your BOMANN Dishwasher, use a mild abrasive cleaner.
Why is my flat tableware not clean in BOMANN GSPE 7413 TI Dishwasher?
If your flat tableware isn't getting clean in your BOMANN Dishwasher, try selecting a stronger wash program. Also, ensure that the spray arms are not blocked by large dishes.
Initial warnings and location guidelines for installing the appliance.
Instructions for connecting the water inlet and drain hoses.
Cautions and regulations for connecting the water supply.
Guidelines for properly connecting the dishwasher's drain hose.
Safety warnings and instructions for electrical connection.
Guidelines for correctly loading dishes and cutlery into the dishwasher.
Safety warnings and tips for loading the cutlery basket.
Details programs, sequences, detergent, time, energy, and water consumption.
Details programs for comparability tests based on EN60436.
Explanation of the buttons and indicator lamps on the control panel.
Step-by-step guide to starting and changing dishwasher programs.
General| Type | Freestanding |
|---|---|
| Energy efficiency class | E |
| Water consumption per cycle | 9.5 liters |
| Noise level | 47 dB |
| Cutlery basket | Yes |
| Adjustable upper basket | Yes |
| Color | Titanium |
| Standard Cycle Energy Consumption | 0.923 kWh |
| Standard Cycle Water Consumption | 9.5 liters |
| Number of Place Settings | 12 |
| Drying System | Residual heat |
| Half Load Option | Yes |
| Product size | 60 cm |
| Programs | Eco, Intensive, Glass, Rapid, Soak |
| Delay Start | Yes |
| Dimensions (H x W x D) | 84.5 x 60 x 60 cm |
To Next Page
