What to do if water is not drained off in BOMANN GSPE 882?
If the water isn't draining from your BOMANN Dishwasher, examine the drain hose for any obstructions. Also, check the filters and the kitchen sink to ensure they aren't clogged.
Why are the rapid control lamps flashing on my BOMANN GSPE 882?
If the rapid control lamps are flashing on your BOMANN Dishwasher, it could be due to the faucet not being opened, a water inlet malfunction, or low water pressure.
Why are there spots and filming on glasses and flatware in my BOMANN Dishwasher?
If you observe spots and filming on glasses and flatware in your BOMANN Dishwasher, it could be due to extremely hard water, low inlet temperature, overloading the baskets, improper loading, old or damp detergent, an empty rinse dispenser, or incorrect detergent dosage.
How to improve drying results in BOMANN Dishwasher?
If you are experiencing an unsatisfactory drying result with your BOMANN Dishwasher, consider that improper loading, too little rinse aid, removing dishes too soon, selecting the wrong program, or using cutlery with a low-quality coating could be the cause.
What to do if there is foaming in BOMANN GSPE 882?
If you see foaming in your BOMANN Dishwasher, use only special dishwasher detergent. If foaming occurs, open the door and let the suds evaporate. Add approximately 4 liters of cold water to the tub. Start a short rinse cycle to drain out the water. Wipe up any spilled rinse aid immediately.
Why are the glass control lamps flashing on my BOMANN GSPE 882 Dishwasher?
If the glass control lamps are flashing on your BOMANN Dishwasher, it indicates a possible overflow or leakage.
How to prevent cloudiness on glassware in BOMANN GSPE 882?
If you notice a cloudiness on glassware after using your BOMANN Dishwasher, try using less detergent if you have soft water. Also, select the shortest cycle to rinse and clean glassware.
How to remove black marks on dishware from BOMANN Dishwasher?
If you find black or grey marks on dishware after using your BOMANN Dishwasher, it means aluminum utensils have rubbed against the dishware. Use a mild abrasive cleaner to eliminate these marks.
What to do if my BOMANN Dishwasher is not working?
If the BOMANN Dishwasher isn't working or starting, first ensure the power supply is connected. Then, check if the appliance is switched on, the door is securely closed, and a program is selected. Also, verify that the water supply is properly connected and opened.
What to do if plates are not clean in BOMANN GSPE 882?
If plates and other flat tableware are not clean after using your BOMANN Dishwasher, select a stronger program. Make sure that the action of the detergent dispenser and spray arm is not blocked by large dishes.
General| Brand | BOMANN |
|---|---|
| Model | GSPE 882 |
| Category | Dishwasher |
| Language | English |
To Next Page
