To Next PageTo Next PageWhat to do if my BOMANN Dishwasher doesn't start?
If your BOMANN Dishwasher doesn't start, check the power supply. Also, ensure the unit is turned on, the door is securely closed, and a program is selected. Verify that the water supply is properly connected and opened.
What to do if water is not draining from my BOMANN TSG 7402?
If water is not draining from your BOMANN Dishwasher, check the drain hose for any blockages. Also, inspect the filters and the kitchen sink to ensure they are not clogged.
Why does my BOMANN Dishwasher leave spots and filming on dishes?
Spots and filming on dishes in your BOMANN Dishwasher can be caused by extremely hard water, low inlet temperature, overloading the baskets, improper loading, old or damp detergent, or incorrect detergent dosage.
How to remove white film on the inside of my BOMANN Dishwasher?
A white film on the inside surface of your BOMANN Dishwasher is likely due to hard water minerals. Clean the interior using a damp sponge with dishwasher detergent and wear rubber gloves.
How to prevent cloudiness on glassware in my BOMANN TSG 7402 Dishwasher?
To prevent cloudiness on glassware in your BOMANN Dishwasher, use less detergent if you have soft water. Select the shortest cycle to rinse and clean the glassware.
How to reduce noise from my BOMANN Dishwasher?
To reduce noise from your BOMANN Dishwasher, make sure that all dishes are secured properly within the dishwasher. Additionally, ensure that the parts are placed so that the spray arms can rotate freely.
Why is my BOMANN Dishwasher not drying dishes properly?
An unsatisfactory drying result in your BOMANN Dishwasher may be due to improper loading, removing dishes too soon, selecting the wrong program, or using cutlery with a low-quality coating.
What to do if my BOMANN TSG 7402 Dishwasher is foaming?
If your BOMANN Dishwasher is foaming: * Use only special dishwasher detergent to avoid foaming. * If foaming occurs, open the door and let the suds evaporate. * Add a bit of cold water to the tub. * Start a short rinse cycle to drain out the water.
How to remove black or grey marks from my BOMANN TSG 7402?
Black or grey marks in your BOMANN Dishwasher are likely caused by aluminum utensils rubbing against dishware. Use a mild abrasive cleaner to eliminate these marks.
General| Type | Freestanding |
|---|---|
| Noise Level | 49 dB |
| Energy consumption per 100 cycles | 78 kWh |
| Delay Start | Yes |
| Child Lock | No |
| Wash Programs | 6 |
| Drying System | Residual heat |
| Depth | 60 cm |
Specifies ideal placement criteria for the appliance, avoiding hazards.
Details the safety features of the inlet hose for preventing water leakage.
Describes connecting the appliance directly to the water tap.
Explains how to manually fill the water tank for operation.
Explains the water softener function and how to adjust salt usage.
Step-by-step guide for adding salt to the water softener.
Explains detergent role, usage, advice for tablets, and how to fill.
Provides tips for securely placing dishes and cutlery for optimal cleaning.
Specific instructions for arranging cutlery on the shelf for effective washing.
Details available programs, their sequences, and resource consumption.
Identifies and explains the function of each button on the control panel.
Instructions on how to safely switch programs during operation.
Procedure for adding dishes mid-cycle without interruption.
Steps for safely cooling and powering down the appliance after use.
Guidelines for safely removing clean dishes after cooling.
Advice on operating the dishwasher efficiently to save energy.
Instructions for cleaning the micro and main filters to maintain performance.
Procedure for cleaning the spray arm nozzles to ensure proper water distribution.
Tips for cleaning outer surfaces, door seals, and interior stains.
Addresses issues like unit not starting, water not draining, and noise.
Details causes and solutions for foaming, flatware, spots, cloudiness, stains, and drying.
Explains error codes (E1, E3, E4, Ed) displayed by control lamps.
