8
03/2014
Repairs
WARNING
Servicing of electric devices must be conducted by qualified experts only. Incorrect or improper repairs
constitute a risk for the user and will void the warranty!
What if . . . Troubleshooting
The design of the device ensures a trouble-free operation as well as a long life cycle. Nevertheless, if
any defect occurs during operation, please check if it is caused by improper operation.
The following problems can be solved by you by checking for the possible cause.
not working
prop
all
Is the plug securely connected to the mains?
Has the safety mechanism of the wall socket
been triggered?
Is the temperature control properly set?
Is the place unqualified?
Do food items or shelves and/or drawers
the door from closing properly?
Is the ventilation of the device hedged?
Connect the plug properly to the sock
the fuse, and contact a technician if necessary.
Check the settings.
Check the ambient temperature.
Arrange the food or shelves and/or drawers
properly.
Clear the ventilation slits, install the device freely
during opera-
tion
Does the device not stand vertical or horizontal?
Adjust the feet accordingly.
Liquid flow sounds in the cooling circuit are
normal.
bottom
Is the temperature control set properly?
Is the discharge opening clogged?
Check the temperature settings.
Clean the discharge opening
or knitting needle.
does not work
Is the plug not connected to the mains?
Has the safety mechanism of the wall socket
been triggered?
Is the illuminant defect?
Connect the plug properly to the sock
the fuse, and contact a technician if necessary.
Disconnect the plug and replace the illumi
(refer to ‘Replacing the bulb’).
Note: On days of high humidity, condensation might occur on the outer surface of the device. This is
no malfunction; you may simply wipe the water off.
If a problem still persists after following the steps above, please contact your distributor or a techni-
cian.
To Next Page
Loading...
