What to do if my BOMANN Washer does not start?
If your BOMANN Washer isn't starting, try these steps: First, ensure the appliance is getting power. Then, check the water supply. Make sure the door is fully closed. Verify that the appliance is switched on and a program is selected. Finally, be sure you've pressed the START/PAUSE button.
Why is my BOMANN WA 5719 Washer leaking water on the floor?
If you notice water on the floor near your BOMANN Washer, inspect the water inlet and drain hoses. Check for any leaks and ensure they are properly connected.
How to fix unusual noises and vibrations in my BOMANN WA 5719?
If your BOMANN Washer is making unusual noises or vibrating excessively, check the following: - Ensure that the transport locking screws have been removed. - Make sure the appliance is leveled on a firm surface and the feet are adjusted properly. - Inspect the drum and drain filter for any foreign objects. - Adjust the spin speed according to the loading capacity.
To Next Page
General
