What to do if the BOMANN WA 5729 Washer is not pumping out water?
If your BOMANN Washer isn't pumping water out, inspect the drain hose to ensure it is not blocked, kinked, or squeezed. Also, verify that the drain hose is correctly connected. The drain pump might also be blocked.
Why is my BOMANN WA 5729 vibrating so much?
If your BOMANN Washer is experiencing strong vibrations, make sure that the transport bolts have been removed. The appliance needs to stand on a firm, level surface, and the feet must be properly aligned.
Why is there no water supply to my BOMANN WA 5729?
If your BOMANN Washer isn't getting any water, make sure the tap is open and the water supply is unobstructed and has sufficient pressure. Also, check if the inlet filter is blocked and ensure the inlet hose is not blocked, kinked, or squeezed.
How to fix a BOMANN WA 5729 that won't start?
If your BOMANN Washer won't start or isn't working, check the power and water supplies. Ensure the door is properly closed, the unit is switched on, and a program is selected.
What to do if water is continuously supplied to the BOMANN WA 5729?
If water is continuously being supplied to your BOMANN Washer, check the inlet water pressure and reduce it if necessary. Close the water supply and contact a specialized technician.
To Next Page
General
