How to open the door of my BOMANN WA 5724?
If your BOMANN Washer door won't open, check if the indicator lamp is off after the program ends and ensure the device is not in a soak or rinse hold state.
How to troubleshoot a BOMANN Washer that is not working?
If your BOMANN Washer isn't working, ensure the power plug is properly inserted, check the water supply, verify that the device is switched on and a program is selected, and confirm that you've pressed the START/PAUSE button.
What to do if there is water on the floor from BOMANN Washer?
If your BOMANN Washer is leaking water onto the floor, check the water inlet and drain hoses for any leaks and ensure they are properly connected.
What to do if BOMANN WA 5724 will not drain or spin?
If your BOMANN Washer won't drain or spin, check the drain pump filter and make sure the drain hose is not squashed. Also, check if the 'rinse-stop' option is activated.
Why is my BOMANN Washer making unusual noises and vibrations?
If your BOMANN Washer is making unusual noises and vibrations, ensure that the transportation locking screws have been removed during installation. The device must be placed on a steady and safe surface, and the feet should be aligned. Also, check whether there are metal objects in the drum or in the drain filter and adjust the spin speed of the loading capacity; at half capacity, 400 rpm are sufficient.
What to do if BOMANN Washer takes continuously water?
If your BOMANN Washer is continuously taking in water, check the inlet water pressure and reduce it if necessary.
Why is there no water supply to my BOMANN WA 5724?
If your BOMANN Washer is not supplying water, it could be due to the tap not being opened, a blocked water inlet, or low water pressure. Ensure the water inlet hose is not squashed and check if the water electro-valve filter is not clogged.
What to do if BOMANN Washer turns on but does not start?
If your BOMANN Washer turns on but does not start, make sure that the door is well closed.
Why does my BOMANN Washer continuously take and discharge water?
If your BOMANN Washer is continuously taking in and discharging water, it might be because the end of the drain hose is too low. Ensure the minimum height is 60 cm and the maximum is 90 cm.
General| Appliance placement | Freestanding |
|---|---|
| Maximum spin speed | 1200 RPM |
| Spin-drying class | B |
| Washing class | A |
| Delayed start timer | Yes |
| Energy efficiency class | A+++ |
| Spin Speed | 1200 RPM |
| Color | White |
| Noise Level (Washing/Spinning) | 76 dB |
To Next Page
