What to do if my BOMANN Washer shows E21 drainage fault?
If your BOMANN Washer displays an E21 error, it indicates a drainage fault. This is often due to a blocked, kinked, or squeezed drain hose, or the hose is not correctly connected. Alternatively, the drain pump may be blocked. You should check and clear both the drain hose and the pump to resolve this issue.
What to do if my BOMANN Washer shows E10 water inlet fault?
If your BOMANN Washer displays an E10 error, it signals a water inlet fault. This can occur if the faucet isn't open, the water supply is restricted, or the water pressure is too low. It may also happen if the inlet filter or hose is blocked, kinked, or squeezed. To fix it, open the faucet, clear any blockages in the water supply, and inspect the inlet filter and hose.
Why is my BOMANN WA 7193 vibrating so strongly?
Strong vibrations in your BOMANN Washer can occur for several reasons. Ensure that the transport bolts have been removed. The device must stand on a firm surface and the feet must be aligned.
What to do if my BOMANN WA 7193 won't start?
If your BOMANN Washer isn't working or starting, check the power and water supplies. Make sure the door is closed properly, the device is switched on, and a program is selected.
What to do if my BOMANN WA 7193 shows E30 door lock fault?
If your BOMANN Washer displays an E30 error, it indicates a door lock fault. This often happens when the door isn't properly closed or is blocked by laundry items. Make sure the door is fully closed and free of any obstructions.
Why I can't open the door of my BOMANN WA 7193?
If you cannot open the door of your BOMANN Washer, it is possible that the door lock is still active because the washing operation has not been completed. Wait for the washing operation to complete before attempting to open the door.
What to do if my BOMANN WA 7193 is constantly admitting water?
If your BOMANN Washer is continuously admitting water, check the inlet water pressure and reduce it if necessary. As a precaution, close the water supply.
What does EXX error mean on my BOMANN WA 7193 Washer?
If your BOMANN Washer displays an EXX error, switch the device off and on again. If the error persists, it is recommended to call a specialist company.
General| Appliance placement | Freestanding |
|---|---|
| Washing capacity | 6 kg |
| Maximum spin speed | 1200 RPM |
| Washing class | A |
| Spin-drying class | B |
| Number of washing programs | 15 |
| Delayed start timer | Yes |
| Energy efficiency class | A+++ |
| Width | 60 cm |
| Height | 85 cm |
| Capacity | 6 kg |
| Number of Programs | 15 |
| Noise Level (Washing/Spinning) | 58 dB / 77 dB |
| Loading type | Front load |
To Next Page
