12
Insert the condenser properly.
Close both locking levers. Close the service cover
and lock it.
Troubleshooting
Before you contact an authorized specialist
For some malfunctions, the display shows error
codes to warn you:
Trouble / Code Possible cause / measure
Appliance does not
work or start
Check the power supply. Is the
door closed, the device switched
on or a program selected? Con-
sider the max. loading capacity.
Unusual sound and
strong
vibration
The device must stand on a firm
surface. Are the feet aligned?
Housing is hot or it
smells like burned
Fluff filter and/or condenser
must be cleaned.
Display symbol
Lint filter is blocked and needs
to be cleaned.
Display symbol
FUL
Condensation tank is full and
must be emptied.
Display code
E30
Heating error
⇨ Call specialist
Display code
E32
Moisture sensor error
⇨ Call specialist
Display code
E33 / E34
Temperature sensor error
⇨ Call specialist
NOTE:
If a problem persists after following the steps above,
contact your distributor or an authorized technician.
Technical Data
Electrical connection………………...…………………..
Connection voltage: …………......220-240 V~ / 50 Hz
Connection power: …………..………………...2700 W
Rated power: ……..………………………..………16 A
Dimension H x W x D / Weight…..…...………………..
Unit size: ………….....……….…84.5 x 59.5 x 61.5 cm
Net weight: ……………………….……approx. 41.0 kg
The right to make technical and design modifications
during continuous product development remains
reserved.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
Disposal
Meaning of the “Dustbin” Symbol
Protect our environment; do not dispose of electrical
equipment in the domestic waste.
Please return any electrical equipment that you will
no longer use to the collection points provided for
their disposal.
This helps avoid the potential effects of incorrect
disposal on the environment and human health.
This will contribute to the recycling and other forms of
reutilization of electrical and electronic equipment.
Information concerning where these can be disposed
of can be obtained from your local authority.
WARNING:
Remove or disable any existing snap and bolt locks,
if you take the unit out of operation or dispose it.
To Next Page
Loading...
