EasyManua.ls Logo

Bomedent Actor I pro - Page 8

Bomedent Actor I pro
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
again to stop working.
Power setting: press and hold the switch button for 1 second in the working state
to switch between "high" power and "low" power
Power indicator light:
Under "high" power: the power indicator light is always green;
Under "low" power: the power indicator light flashes in green
Battery power indicator light
②
Blue: it means that the battery power is above 50%;
Yellow: it means that the battery power is between 10% and 50%;
Flash in yellow: it means that the battery power is less than 10%, and the
battery should be charged in time;
Green: when the green light is always on, it indicates that the device is being
charged. When the device is fully charged, the green light will turn off
automatically.
Bluetooth button
③
Turn on bluetooth: when both the wireless foot switch and the device are in
standby state, press any button of the wireless foot switch first, and then press the
bluetooth button ③ to open the bluetooth;
Turn off bluetooth: when the bluetooth is on, press the bluetooth button ③ to turn
off the bluetooth;
Bluetooth indicator light:
The indicator light is always on in blue: it means that the bluetooth has been
turned on, but the device is not connected with the wireless foot switch;
The indicator light flashes in blue: it means that the device has been
connected with the wireless foot switch, and they can communicate normally;
The indicator light is off: the bluetooth is not turned on.
Illuminating light
④
This indicator light is always on when the device is working
Charging indicator light on the charging base
⑤
When the charging base is powered on, the charging indicator light on the