Why do colors look different between same bon BXM-243L3G Monitor models?
If the colors look different between the same models of BON monitors, give your monitor a one-hour warmup time. Even the same panels have a tolerance range among them by the panel manufacturer, so colors might look different.
General| Screen Size | 24 inches |
|---|---|
| Resolution | 1920 x 1080 (Full HD) |
| Aspect Ratio | 16:9 |
| Panel Type | IPS |
| Refresh Rate | 60 Hz |
| Response Time | 5 ms |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Input Ports | 1 x HDMI, 1 x VGA |
| Weight | 3.5 kg |
| Input | HDMI, VGA |
| Viewing Angle | 178° (H) / 178° (V) |
Monitors the power status and standby mode.
Interface for digital video and audio signals.
Connects to analog video sources like CVBS, SVIDEO, RGB.
Waveform and Vector Scope display function.
Port for connecting the AC power adapter.
Serial Digital Interface ports for video signals.
Analog video input/output ports.
For synchronizing with external timing signals.
Digital video input ports.
For network connectivity and remote control.
Adjusts basic video image representation values.
Configures NTSC signal parameters like IRE levels.
Optimizes signal handling for screen changes.
Enhances motion picture smoothness for low-quality sources.
Sets the screen aspect ratio (e.g., 16:9, 4:3).
Enables 1:1 pixel mapping for accurate image display.
Automatic Format Detection for aspect ratio settings.
Selects between Single or Dual SDI input modes.
Enables support for 3G SDI signals.
Configures waveform display for analysis.
Improves motion smoothness for interlaced inputs.
Configures Picture-in-Picture or Picture-by-Picture display modes.
Selects waveform display for the whole picture or a single line.
Chooses the component (Y, Cb, Cr) for waveform display.
Switches between wide and full-screen waveform scopes.
Selects single or mixed color for waveform display.
Identifies over/under-exposed areas using Y, C level.
Sets Y range values for exposure range checking.
Sets C range values for exposure range checking.
Sets the color for indicating exposure range areas.
Adjusts the blinking speed for range-checked areas.
Uses false color to check exposure levels.
Accesses sub-menus for focus assistance.
Adjusts the display's color temperature.
Fine-tunes RGB gains in user-defined mode.
Adjusts RGB bias in user-defined mode.
Selects gamma curves for image processing.
Chooses the color space standard for accurate color.
Selects preset or user-defined marker types.
Adjusts safety area size for 16:9 screens.
Adjusts safety area size for 4:3 screens.
Enables or disables the center marker display.
Sets the color of the displayed markers.
Defines how areas outside the safety zone are displayed.
Sets the thickness of the marker lines.
Controls the display of timecode information.
Sets the on-screen position of the timecode.
Configures how long menu elements are shown.
Adjusts the transparency of on-screen display elements.
Selects the screen location for the main menu.
Activates display of IMD/UMD information.
Sets custom text for IMD/UMD display.
Manages closed caption display settings.
Assigns audio channels to groups.
Selects audio channel for the left output.
Selects audio channel for the right output.
Turns audio level meters on or off.
Selects the size of the audio meters.
Selects the position of the audio meters.
Selects the orientation of audio meters.
Adjusts the decay time for audio meters.
Enables or disables external monitor control functions.
Assigns functions to specific GPI ports.
Sets a unique ID for serial port control.
Activates remote control via serial connection.
Configures network settings for remote control.
Assigns a unique port for monitor identification.
Unique network address for the device.
Assigns functions to front panel buttons.
Adjusts screen backlight intensity.
Shows built-in test patterns for calibration.
Manages the status LEDs on the front panel.
Prevents accidental changes via front buttons.
Loads monitor configuration settings.
Saves current monitor configuration settings.
To Next Page
