17
en
DISASSEMBLY AND STORAGE
Please note that the removable connector pieces are
detachable. When moving the unit to a new loca-
tion, disassemble the unit into the detachable parts,
transport the individual parts to the desired location,
and then reassemble. To reduce the risk of fire or
electric shock, do not use this fan with any solid-
state speed control device.
Storage is easiest and most efficient when you use
the original packaging. Store the BONECO Air Shower
Fan in a dry place.
DISASSEMBLY AND STORAGE
1. Unplug the power cord from the power outlet.
2. Press the release knob on the upper connector piece.
3. Remove the fan by pulling firmly upwards.
4. Press the release knob on the lower connector piece.
5. Remove the connector piece from the base.
To Next Page
Loading...
