EasyManuals Logo

Boneco H680 User Manual

Boneco H680
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
56
en
The BONECO H680 has to be cleaned and descaled at
regular intervals. An upcoming need for cleaning is indi-
cated on the display with the following cleaning symbol:
Be sure to remove the Ionic Silver Stick
®
before the
descaling process.
EVAPORATOR MAT
The evaporator mat lasts indefinitely. However, you can
order a new evaporator mat together with the drum as a
spare part if necessary. The set is available through your
BONECO specialist dealer or the BONECO online store:
www.shop.boneco.com
PREPARING FOR FIRST USE
1. Remove the front cover and the water tank on the rear
side.
2. Remove the filter holder together with the filter.
3. Pull the water base out and remove the drum with the
evaporator mat.
4. Empty the water base and remove the Ionic Silver
Stick
®
.
5. Remove the evaporator mat.
6. Set the drum back into the water base and put the ap-
pliance back together by following the steps in reverse
order.
AUTOMATIC CLEANING FUNCTION

Other manuals for Boneco H680

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Boneco H680 and is the answer not in the manual?

Boneco H680 Specifications

General IconGeneral
Noise level51 dB
Air purify rate205 m³/h
Number of speeds-
Humidifier functionYes
Water tank capacity10 L
Humidification capacity1000 ml/h
Suitable for room area up to150 m²
Suitable for room volume up to375 m³
Filtering capabilityFine dust, Pollen, Viruses
Product colorBlack, White
AC input voltage100 - 240 V
AC input frequency50-60 Hz
Power consumption (max)30 W
Weight and Dimensions IconWeight and Dimensions
Depth347 mm
Width435 mm
Height490 mm
Weight10400 g

Related product manuals