Boneco S250 User Manual

10
en
PROCEDURE
Although the anti-mineral pad absorbs most of the lime
in the water, the heating plate of the BONECO S250 ex-
periences calcification after an extended operating time.
An upcoming need for cleaning is indicated on the display
by the symbol.
To make descaling easy and convenient, the BONECO
S250 is equipped with an automatic cleaning function.
This warms and cools the heating plate multiple times in
order that the lime becomes crumbly and can be easily
removed.
STARTING THE CLEANING
1. Switch off the BONECO S250 and let it cool down for
1 hour.
2. Remove the anti-mineral pad and empty the water
tank.
3. Mix 1 bag EZCal
®
with 32 oz. (1 liter) of warm tap
water.
4. Add the mixture to the BONECO S250.
5. Press the button for 3 seconds to start the clean-
ing.
6. Select the duration of cleaning you want (1 to 9 hours)
using the and buttons. If stubborn mineral de-
posits are left after cleaning, you can always extend
or repeat the cleaning process.
7. Unplug the BONECO S250 and rinse the water tank
with tap water.
8. Place the anti-mineral pad back into the water tank.
CLEANING FUNCTION

Boneco S250 Specifications

General

Noise level	35 dB
Water tank capacity	3 L
Removable water tank	Yes
Evaporation technology	Steam
Air purification capability	-
Suitable for room area up to	40 m²
Suitable for room volume up to	100 m³
AC input voltage	230 V
Power supply type	AC
AC input frequency	50 Hz
Display type	LED
Product color	Black, White

Weight and Dimensions

Depth	316 mm
Width	172 mm
Height	281 mm
Weight	2500 g