Boneco S250 User Manual

8
en
HANDLING
CONTROLLING HUMIDITY
The BONECO S250 is equipped with a hygrostat that con-
tinuously monitors the humidity in the room and regulates
the unit's operation. The adjustable range is between
30% and 70%.
1. Switch on the BONECO S250.
2. Use the and buttons to set the desired hu-
midity. The display shows the note ("de-
sired").
3. A few seconds after the last input, the display
changes back to . The display now shows
the current humidity again.
The BONECO S250 stops humidification once the desired
value is reached. Humidification continues automatically
as soon as the set value is no longer met.
REGULATING OUTPUT
The performance of the BONECO S250 is regulated in
two levels.
1. Press the button to switch between the two per-
formance levels.
The selected level is shown on the display by the symbols
(“High”) and (“Low”).
The selected level does not affect the measurement or the
control functions of the hygrostat.

Boneco S250 Specifications

General

Noise level	35 dB
Water tank capacity	3 L
Removable water tank	Yes
Evaporation technology	Steam
Air purification capability	-
Suitable for room area up to	40 m²
Suitable for room volume up to	100 m³
AC input voltage	230 V
Power supply type	AC
AC input frequency	50 Hz
Display type	LED
Product color	Black, White

Weight and Dimensions

Depth	316 mm
Width	172 mm
Height	281 mm
Weight	2500 g