Need help?Do you have a question about the BONFIGLIOLI A 90 and is the answer not in the manual?
General| Category | Engine |
|---|---|
| Series | A |
| Type | Three-phase asynchronous motor |
| Size | 90 |
| Protection class | IP55 |
| Voltage | 230/400 V or 400/690 V |
| Frequency | 50/60 Hz |
| Current | Varies depending on power and voltage |
| Efficiency | IE1, IE2, or IE3 |
| Mounting | B3, B5, B14 |
| Weight | Varies depending on the specific model |
Lists compliance with Essential Health and Safety Requirements and ATEX Directive.
Details ambient conditions, lighting, and noise/vibration limits for safe operation.
Emphasizes reading instructions, training personnel, proper use, and maintenance for safety.
Provides guidelines for safe handling of packages and equipment to prevent injury.
Covers planning, cleaning, checks, alignment, and securing the gear unit during installation.
Focuses on anchoring the torque arm for shaft-mounted units, especially for ATEX areas.
Provides precautions for installing an IEC-flange mount electric motor onto the gear unit.
Lists essential checks before operating the gear unit to ensure safety and proper function.
Details how to measure surface temperature, limits, and the importance of temperature differential (ΔT).
Identifies the shaft protrusion as a danger zone requiring protection.
Outlines scheduled checks and replacements for optimal efficiency and service life.
Details the procedure for draining, filling, and tightening oil plugs.
Lists compatible oils and greases for ATEX-certified gear units.
Describes checks for dust, noise, power absorption, wear, and leaks.
To Next Page