Need help?Do you have a question about the BONFIGLIOLI A Series and is the answer not in the manual?
General| Mounting | Foot-mounted, Flange-mounted, Shaft-mounted |
|---|---|
| Output | Shaft output |
| Motor Type | IEC standard motors |
| Mounting Position | Any |
| Protection Class | IP65 |
Specifies ambient temperature, lighting, noise, and vibration limits for safe and optimal operation.
Highlights essential safety standards, personnel training, and proper use of gear units for health and safety.
Details the general installation process, cleaning, checks, and mounting procedures for safe setup.
Precautions and procedures for installing an IEC-flange mount electric motor onto the gear unit.
Identifies danger zones, particularly the shaft protrusion, and necessary protection requirements.
Schedule and tasks for routine checks, including seals, gaskets, and oil level, to ensure efficiency.
Information on checking oil levels and the use of lifetime lubricated gear units, plus mixing warnings.
Step-by-step procedure for draining and refilling the gear unit with new oil, including safety precautions.
Lists compatible oils and greases for ATEX-certified gear units, ensuring correct lubrication.
Procedure for removing the motor from the gear unit, including using an impact extractor tool.
Illustrates lifting methods for Series C gear units with corresponding attachment solutions for positioning and handling.
Illustrates lifting methods for Series A gear units with recommended positioning and handling solutions.
To Next Page