BONFIGLIOLI A 70

INDUSTRY PROCESS
AND
AUTOMATION SOLUTIONS
C, A, F, S, VF, W
ATEX
INCLUDED
Installation, use and service manual

BONFIGLIOLI A 70 Specifications

General

Brand	BONFIGLIOLI
Model	A 70
Category	Engine
Language	English

Summary

Technical Information

Operating Limits and Conditions

Specifies ambient temperature, lighting, and noise/vibration limits for safe gear unit operation.

Safety Information

Safety Standards

General safety guidelines for personnel, gear unit usage, maintenance, and environmental protection.

Handling and Transport

Handling Instructions

Provides step-by-step instructions for safely moving packages and gear unit equipment.

Installation

Installing the Gear Unit

Step-by-step guide for installing gear units, covering cleaning, checks, and mounting procedures.

Gear units with solid output shaft

Instructions for mounting external parts onto solid output shafts safely.

Gear units with hollow output shaft

Guidance on mounting hollow shaft gear units onto a machine's driven shaft.

Gear units with shrink disk

Shaft mounted gear units series F

Installing an IEC-Standard Flanged Motor

Precautions and steps for mounting an IEC-standard flanged motor to the gear unit.

Testing the Gear Unit

Maintenance

Routine Maintenance

Replacing Parts

Taking Apart of the IEC-Standard Flanged Motor

Troubleshooting

Annex 1 - Checking Oil Level on ATEX-Specified Gear Units

Annex 2 - Lubricant Fill Quantity

Annex 5 - Installing the Motor on Type VFR Worm Gear Units

Annex 6 - Calibrating the Torque Limiter Slip Torque