BONFIGLIOLI AS 45

Details on torque definitions, including rated, required, and calculated torque values.

Information on power ratings, including input rated power and its relation to motor speed.

Defines thermal capacity (Pt) and provides ratings in kW for different motor sizes.

Explains the service factor (fs) and its determination based on load type and operating conditions.

Lists required data for selecting the correct gearmotor or gear unit.

Ensures thermal capacity meets application requirements, suggesting derating or cooling if needed.

Verifies that the maximum applicable torque does not exceed 200% of rated torque.

Provides essential guidelines for proper installation, including securing and alignment.

Provides information on factory-filled synthetic lubricant and operating temperature limits.

Explains how radial forces act on shafts and provides formulas for calculation.

Details permissible thrust loads and their relation to radial loads.

Describes thermal protection options like PTC thermistors and bimetallic thermostats.

Details feedback options such as encoders and Hall effect sensors.

Describes bimetallic thermostats for thermal protection in windings.

Describes PTC thermistors for thermal protection in windings.