Need help?Do you have a question about the BONFIGLIOLI AS 30 and is the answer not in the manual?
General| Brand | BONFIGLIOLI |
|---|---|
| Model | AS 30 |
| Category | Engine |
| Language | English |
Ensures radial forces on shafts are within catalogue values for proper operation.
Compares axial loads with admissible values, advising consultation for high axial forces.
Determines starting capability based on duty cycles other than S1 and service factor.
Details the braking torque specifications for different brake types.
Specifies the enclosure protection rating for motors.
Specifies allowed tolerances for parameters based on CEI EN 60034-1 standards.
Defines duty cycles S2 and S3 with power increase coefficients for single-pole motors.
Lists options for thermal protection (D3, E3).
Details feedback device options for motor control.
Describes options for rotor balancing to reduce vibration.
Describes bimetallic thermostats for motor winding protection.
Describes PTC thermistors for motor winding protection.
Details encoder options and their compatibility.
Explains manual brake release lever operation and its locking mechanism.
Explains the manual release lever operation and its locking mechanism.
Describes vibration classes for rotor balancing and their associated speed limits.
Specifies IP protection ratings for AC brake motors (BN_BA).
To Next Page