BORETTI BIKP-79 - Booster Function; Timer

58
Booster function
The Booster function [ P ] and the Double Booster [
] grants a boost of Booster to the selected
heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra high Booster.
Booster is foreseen for example to heat up rapidly big quantities of water, like nuddles
 Start up / Stop the booster function:
Action Control panel Display
Zone selection Press key [ 0 ] from the zone [ 0 ] and control light on
Start up the Booster Press key [ P ] [ P ]
Stop the Booster Slide on the “SLIDER“ [ 9 ] to [ 0 ]
 Start up / Stop the double booster function:
Action Control panel Display
Selection of the zone Press key [ 0 ] [ 0 ]
Start up Booster Press key [ P ] [ P ]
Start up Double Booster Re-press key [ P ] [
and P ]
Stop the Double Booster Press key [ P ] [ P ]
Stop Booster Slide on the “SLIDER“ [ 9 ] to [ 0 ]
 Booster management:
The hole cooking hob is equipped with a maximum of Booster. When the Booster function is
activated, and in order to exceed the maximum Booster, the electronic system orders to reduce
automatically the Booster level of an other heating zone. The display is blinking on [ 9 ] during a few
seconds and then shows the maximum of Booster allowed :
Heating zone selected The other heating zone: (example: Booster level 9)
[ P ] is displayed [ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone
Timer
The timer is able to be used simultaneous with all 4 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
 Setting and modification of the cooking time:
Example for 16 minutes at power 7:
Action Control panel Display
Zone selection press display [ 0 ] selected [ 0 ] and control light on
Select the power level slide on the “SLIDER“ to [ 7 ] [ 7 ]
Select « Timer » press display [ CL ] [ 00 ]
Set the units slide on the “SLIDER“ to [ 6 ] [ 0 fixed ] [ 6 blinking ]
Valid the units press display [ 06 ] [ 0 blinking ] [ 6 fixed ]
Set the tens slide on the “SLIDER“ to [ 1 ] [ 1 blinking ] [ 6 fixed ]
Valid the tens press display [ 16 ] [ 16 ]
The time is confirmed and the cooking starts.
 To stop the cooking time:
Example for 13 minutes at power 7:
Action Control panel Display
Zone selection press display [ 7 ] selected [ 0 ] and control light on
Select « Timer » press key [ 13 ] [ 13 ]
Deactivate the units slide on the “SLIDER“ to [ 0 ] [ 1 fixed ] [ 0 blinking ]
Valid the units press display [ 10 ] [ 1 blinking ] [ 0 fixed ]
Deactivate the tens slide on the “SLIDER“ to [ 0 ] [ 0 blinking ] [ 0 fixed ]
Valid the tens press display [ 00 ] [ 00 ]