- 6 -
STEP 6:
2. Plug the Power cord (49) into the
power cord socket of the Main frame (1).
(Unplug the power cord when the tread-
mill is not in use)
Note: After confirming that all installations are completed according to the above requirements, all
screws must be tightened uniformly, and the power can be turned on after checking that there are
no omissions. Please refer to the following related instructions carefully for the operation and the
use of the treadmill.
1. Put the Safety key (32) on the compu-
ter.
To Next Page
Loading...
