BorMann Pro BAP7000 - Short-Term Storage Instructions; Shutdown for Short-Term Storage; Startup from Short-Term Storage

EN
WWW.BORMANNTOOLS.COM
16
Short-Term Storage (up to 16 hours)
Follow these steps when using latex materials only. If using materials that are oil-based, follow the Cleanup and Long- Term Storage steps.
Shutdown
Startup
1. Lock the spray gun o
2. Turn the PRIME/SPRAY knob to PRIME. Switch
the pump OFF (O). Unplug the sprayer.
1. Remove the gun from the plasc bag. Sr the
water into the paint.
2. Turn the PRIME/SPRAY knob to PRIME. Plug
sprayer in. Turn the switch to ON (I).
3. Turn the PRIME/SPRAY knob to SPRAY. Test the
sprayer on a pracce piece and begin spraying.
3. Pour 1/2 cup water slowly on the top of the
paint to prevent the paint from drying. Wrap the
spray gun assembly in a damp cloth and place
it in a plasc bag. Seal the bag shut. Place the
sprayer in a safe place out of the sun for short-
term storage.