BorMann Pro BAP7000 - Long-Term Storage Procedure; Preparing for Extended Storage; Final Cleaning and Storage Steps

EN
WWW.BORMANNTOOLS.COM
17
Long-Term Storage
Follow these instrucons only aer all cleanup steps have been performed.
1. Fill a cup or other container with separang oil
(approximately 2 ounces) supplied with the unit
and submerge the inlet valve into the oil.
2. Place a rag over the spray hose port,
and turn the switch ON (l). When the oil
has been sucked from the cup,
turn the pump OFF (O).
3. Wipe the enre unit, hose and gun
with a damp cloth to remove accumulated
paint. Replace the high pressure hose
to the paint hose port.
Separang oil