BORRESEN X3 - Safety and Maintenance Instructions; Electrical Safety and Amplifier Use; Environmental and Handling Precautions

Avoid bringing external metal objects close to the
loudspeaker. The tweeter contains very strong
magnets and close contact with metal objects can
cause damage.
The loudspeakers may be damaged due to distorted
output signals from too weak, defective or overloaded
ampliers. Use only high quality ampliers and run
these within the specied power ratings.
Let the speaker reach room temperature before
plugging it in. Condensation may arise in the
electronic circuitry when moving the speaker from
cold to warm surroundings. Such moisture may
damage the speaker’s components.
To protect the surface, please wear protective gloves
when handling the loudspeaker.
Never use the product in damp settings. Foreign
bodies must not be inserted into the bass reex ports
of the speaker. Avoid touching the speaker elements.
Do not use a vacuum cleaner to remove dust from the
loudspeakers elements. Brush it away gently with a soft brush.
Do not use any detergent. It may discolor the nish.
Clean the surface of the loudspeakers with a rmly wrung,
damp cloth.
Do not expose the cabinets to direct sunlight.
SAFETY INSTRUCTIONS
MAINTENANCE