BORRESEN X3 - Burn in; Recommended Products

X3 / USER GUIDE 9
BURN IN
RECOMMENDED
PRODUCTS
All new high quality loudspeakers need a certain period of burn in time.
As Børresen loudspeakers uses long-stroke bass driver with natural rubber
surrounds, the loudspeakers needs at least 50 - 100 hours of actual music
playing at decent sound level.
You will notice a gradual improvement in sound quality.
No particular precautions need to be taken during those hours.
Ansuz loudspeaker cables
Børresen recommends to use high quality loudspeaker cables together
with these high end speakers. Since Børresen loudspeakers are
developed and designed by the same people as Ansuz cables the two
brands share a common DNA when it comes to sound reproduction.
Ansuz develops and manufactures cables based on advanced,
cutting edge technologies. Ansuz cables deliver a pure signal ow
that unleashes the authentic sound originally intended by the master
recording. To achieve this, it is imperative to lower resistance, curb
induction and reduce noise oor to a minimum. The more advanced
the cable series, the more rened and sophisticated the implemented
technologies, and the more transparent, holistic and authentic the
resulting soundstage.
Ansuz Darkz resonance control
The loudspeaker stands are prepared for using the Ansuz Darkz
resonance control devices. Ansuz Darkz absorb vibrations that are not
directly related to the signal path. The absorption results in an audible
vibration feedback, which affects the sound quality. It is the natural and
authentic sound that Ansuz Darkz devices are designed to preserve.
There is no alteration of the authentic sound reproduction which,
when using conventional grounding materials, often make the sound
unnaturally cold and harsh.
Explore our entire product range at
AUDIOGROUPDENMARK.COM
HOURS
100 200 300 400 500
SOUND QUALITY