EasyManua.ls Logo

Bort Alligator X - Waste Disposer: Installation, Maintenance, and Operation; Product Specifications and Description

Bort Alligator X
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Wireless button connectivity +
Product Life:
The service life of the product is 5 years.
Production date:
Is indicated on the packaging of the goods.
Shelf life:
Shelf life is not limited (subject to storage conditions).
Storage conditions:
Products are stored in dry, ventilated warehouses at tem-
peratures from 0 ° C to +40 ° C with a relative humidity of
not more than 80%.
Transportation:
It is strongly prohibited dropping and any mechanical im-
pact on the packaging during transportation.
When unloading / loading, it is not allowed to use any
type of equipment that works on the principle of packing
clamping.
REQUIRED TOOLS AND MATERIALS:
Screwdriver, Hinged pliers, insulation tape, protec-
tive glasses.
REQUIRED INSTRUMENTS, MATERIALS AND
OPTIONAL EQUIPMENT:
a Phillips screwdriver, a drainage drill, electrical
terminal 9.5 mm, threaded nuts (2), siphon 38 mm,
drill 32 mm, hammer, hacksaw, water hose clamp,
pipe pliers, copper grounding wire, dishwasher
drainage pipe kit, electric switch, extension pipe.
1. DESCRIPTION OF THE PRODUCT FIG.1.1
Assembly unit
1. Stopper
2. Washing ange
3. Rubber gaskets (2)
4. Support ring
5. Mounting ring
6. Screws
7. Locking ring
8. Sound attenuating screen Disposer
INSTALLATION INSTRUCTIONS, MAINTENANCE
AND USING THE DISPOSER
Before installing the product, read everything
carefully. Installation, maintenance and use man-
ual. Before starting work determine which tools,
materials, and equipment you need.
Before installing the disposer, make sure that you
have all the necessary parts of the product.
TECHNICAL SPECIFICATIONS (FIG. 1)
Number of crushing stages 3
Power 560 W
The volume of the chamber 1100 ml
Grinding element material Stainless steel
No-load speed
1200 - 2 200
rpm
Product weight 4,6 kg
Mains supply tension / Current
frequency
220 V / 50 Hz
Motor type
Permanent
magnet
Power hp 0,75 l/sec
Performance 4,2 kg/min
Drain hole diam
3 1/2" (90
mm)
Sink bottom thickness 1 mm
Noise level 54 dB
Power cord length 1,2 m
The power amplifier (booster) +
Quiet start +
The system of protection against
overloads and jamming
+
Automatical turn-off +
Quiet operation +
Dishwasher connection +
ENGLISHGB