2
SAFETY AND OPERATING INSTRUCTIONS
HIGH PRESSURE CLEANER
For your own safety and for the safety of others, please
read these instructions carefully before using this appli-
ance.
WARNING! Always read the instruction for
electrical products carefully before use. It will
help you understand your product more easily
and avoid unnecessary risks. Keep this instruction man-
ual in a safe place for future use.
1. MACHINE DATA
INTRODUCTION
Thehighpressurecleanerisquickandecientforclean-
ing vehicles, machines, boats, buildings, etc., by the re-
moval of stubborn dirt using clean water and chemical
detergents.
When using chemical detergents, only use biodegrad-
able types. Only clean vehicle engines in areas in which
suitable oil traps are installed.
TECHNICAL SPECIFICATIONS
Voltage 220 V
Input power 2700 W
Working pressure 160 bar
Max. pressure water supply 190 bar
Maximum capacity 600 l/h
Auto-sucking function +
Automatic blocking +
Hose 10 m
Power cord length 5 m
Weight 38,5 kg
The complete set includes:
Adjustable spray nozzle
Pressure hose
Waterlter
Nozzles (4 PCs.)
2. SAFETY INSTRUCTIONS
EXPLANATION OF SYMBOLS
In this manual and/or on the machine the following
symbols are used:
In accordance with essential applicable safety
standards of European directives
Risk of damaging material and/or physical inju-
ries
Remove plug from the mains immediately if
cable is damaged or cut
Read instruction manual
Denotes risk of electric shock
SAFETY INSTRUCTIONS
When using electric machines always observe the safety
regulations applicable in your country to reduce the risk of
re,electricshockandpersonalinjury.Readthefollowing
safety instructions and also the enclosed safety instruc-
tions.
Keep these instructions in a safe place!
ELECTRICAL SAFETY
● Alwayscheckifyourmainsvoltagecorrespondswith
the value on the type plate.
● When replacingold cables orplugs: throwaway old
cables or plugs immediately as soon as new ones
have replaced these. It is dangerous to put the plug of
a loose cable into the socket outlet.
● Whenusingextensioncables:
Only use an approved extension cable that is suitable for
the machine’s power. The cores must have a diameter of
at least 1.5 mm
2
. When the extension cable is on a reel,
unroll the cable in its entirety.
● All electrical connections e.g. extension cable, must
be of an approved waterproof type for outdoor use and
marked accordingly. Extension cables must be three-
core, one of which is EARTH.
SWITCH OFF THE MACHINE IMMEDIATELY
IN CASE OF
1. Malfunction in the mains plug, power cable or dam-
aging of cable.
2. Broken switch.
3. Smoke or stench of scorched insulation.
SPECIFIC SAFETY RULES
The USE and MAINTENANCE manual constitutes an es-
sential part of the cleaner equipment and should be kept
in a safe place for future reference. If you sell the cleaner,
the manual should be handed on to the new owner.
● Beforestartingthecleaner,makesurethatitisreceiv-
ing water correctly. Operating the cleaner without wa-
ter could damage the seals.
● Donotdisconnecttheplugbypullingontheelectrical
cable.
● If you aretoo farfrom the objectyou wishto clean,
do not move the cleaner nearer by pulling on the high
pressure hose; use the handle provided.
● InversionsnotequippedwithTSSdevice,donotop-
erate the cleaner for more than 1-2 minutes with the
gun closed as this could damage the seals.
● Protectthecleanerfromfreezingduringthewinter.
● Donotobstructtheventilationgrillesduringoperation.
● Thecross-sectionofanyextensioncablesusedmust
be proportional to their length, i.e. the longer the ex-
tension cable, the greater the cross-section; cables
with a protection level of “IPX5” must be used.
● PositionthecleanerASNEARPOSSIBLEtothewa-
ter supply.
● Thepackagingiseasilyrecyclable,andmustbedis-
posed of in compliance with the regulations in force in
the country of installation.
● Use the cleaner only with accessories and replace-
English
To Next Page
Loading...
Need help?
General
