Bort KEX-3000 User Manual

3
- Use a Residual Current Device (RCD) of not more
than 30 mA, at the plug socket when using this appli-
ance.
- INJURY HAZARD.
 Thehighpressuremaycausematerialstobounceo󰀨
surfaces at speed; therefore protective clothing and
safety goggles MUST BE WORN.
- ACCIDENTALSTART-UPHAZARD.
Before doing work on the cleaner, REMOVE the plug.
- INJURY HAZARD.
 Before pressing the trigger, GRIP the gun rmly to
counteract the recoil.
- CONTAMINATION HAZARD.
 COMPLY WITH the requirements of the local water
supply company. According to DIN 1988, power-jet
cleaners may only be connected to the mains drinking
watersupplyifabackowpreventervalvewithdrain
facility is installed in the supply hose.
- ACCIDENT HAZARD.
Maintenance and/or repair of electrical components
MUSTbecarriedoutbyqualiedsta󰀨.
- INJURY HAZARD.
DISCHARGE residual pressure before
disconnecting the cleaner hose.
- ACCIDENT HAZARD.
Before using the cleaner, CHECK every time that the
screws are fully tightened and that there are no broken
or worn parts.
- EXPLOSIONANDELECTRICSHOCKHAZARD.
Only USE detergents which will not corrode the coat-
ing materials of the high pressure hose/electrical ca-
ble.
- INJURY HAZARD.
ENSURE that all people or animals keep a minimum
distance of 16 yd. (15m) away.
SAFETY VALVE
The safety valve also functions as a pressure limiting
valve. When the gun trigger is released, the safety valve
opens and the water recirculates through the pump inlet.
3. ASSEMBLY
High pressure washer KEX-3000 comes assembled and
ready for use.
CONNECTION
1. Attach the high pressure hose to the pressure water
outlet of the machine.
2. Attach the spray handle to the high pressure hose.
Prior to operating the machine please ensure that the
high pressure hose has been completely uncoiled.
Whilst the machine is in operation the hose MUST not
loop.
3. Mount the nozzle or any other equipment you want
to use.
4. Connect the machine to the water and power supplies.
INSTALLATION, ELECTRICAL AND WATER
CONNECTIONS (g1)
1. pressure cleaner
2. water supply hose
3. water connection
4. water inlet
5. high pressure tube
ment parts authorized by the manufacturer. The use of
original accessories and replacement parts will ensure
safe, trouble-free operation.
● Thecleanermustbeusedstandingonasecure,sta-
ble surface.
● Avoid unintentionalring of the trigger. Do notcarry
the lance/ trigger assembly with your hand over the
trigger. Always use the trigger lock mechanism.
● Ensure that the safety lock on the trigger is used,
when you have stopped using the pressure washer to
prevent accidental operation.
SAFETY “MUST NOTS”
- EXPLOSIONORPOISONING.
 DONOTusethecleanerwithinammableortoxicliq-
uids, or any products which are not compatible with
the correct operation of the cleaner.
- INJURY HAZARD.
DO NOT direct the water jet towards people or ani-
mals.
- ELECTRICSHOCKHAZARD.
DO NOT direct the water jet towards the unit itself,
electrical parts or towards other electrical equipment.
- SHORT CIRCUIT HAZARD.
DO NOT use the cleaner outdoors in case of rain.
- INJURY HAZARD.
DO NOT allow children or incompetent persons to use
the cleaner.
- ELECTRICSHOCKHAZARD.
DO NOT touch the plug and/or socket with wet hands.
- ELECTRICSHOCKANDSHORTCIRCUITHAZARD.
DO NOT use the cleaner if the electrical cable is dam-
aged.
- EXPLOSIONHAZARD.
DO NOT use the cleaner if the high pressure hose is
damaged.
- ACCIDENT HAZARD.
DO NOT jam the trigger in the operating position.
- ACCIDENT HAZARD.
Checkthat thedataplates area󰀩xed tothecleaner,if
not, inform your dealer. Cleaners without plates must
NOTbeusedasthey areunidentiable andpotentially
dangerous.
- EXPLOSIONHAZARD.
DO NOT tamper with or alter the calibration of the
safety valve.
- HAZARDOUSALTERATION OF OPERATING PER-
FORMANCE.
DO NOT alter the original diameter of the spray head
nozzle.
- ACCIDENT HAZARD.
DO NOT leave the cleaner unattended.
- SHORT CIRCUIT HAZARD.
DO NOT move the cleaner by pulling on the electrical
cable.
SAFETY “MUSTS”
- SHORT CIRCUIT HAZARD.
All electrical conductors MUST BE PROTECTED
against the water jet.
- ELECTRICSHOCKHAZARD.
 ThecleanerMUSTONLYBECONNECTEDtoacor-
rectly earthed power supply.

Bort KEX-3000 Specifications

General

Brand	Bort
Model	KEX-3000
Category	Pressure Washer
Language	English