Bosch 0 601 7D1 600 - Page 28

28 | English
Angle Grinder GWS 14-125 GWS 14-125 S GWS 17-125 GWS 17-125 S
Speed preselection – ● – ●
Constant electronic control ● ● ● ●
Restart protection ● ● ● ●
Soft start ● ● ● ●
KickBack Control ● ● ● ●
Run-out brake – – – –
Drop Control – – – –
Weight
B)
kg 2.2–2.5 2.2–2.5 2.2–2.5 2.2–2.5
Protection class
/ II / II / II / II
A) Rated no-load speed for the selection of appropriate application tools in accordance with ENIEC62841-2-3. The actual no-load speed
must not exceed the rated no-load speed and is therefore lower.
B)
Depends on protective guard((12), (11), (13)) and auxiliary handle((8), (9)) in use
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-
specific models.
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit
www.bosch-professional.com/wac.
Angle Grinder GWS 17-125 TS GWS 17-125 S INOX GWS 17-150 S GWS 17-125 SB
Article number
3601GD04.. 3601GD05.. 3601GD06.. 3601GD07..
Rated power input W 1700 1700 1700 1700
Power output W 1010 1010 1010 1010
Rated no-load speed
A)
min
-1
9700 7800 9700 11,500
Speed adjustment range min
-1
2400–9700 1900–7800 2400–9700 2800–11,500
Max. grinding disc diameter/rubber
sanding pad diameter
mm 125 125 150 125
Grinding spindle thread M 14 M 14 M 14 M 14
Max. thread length of grinding
spindle
mm 21 21 21 14
Speed preselection ● ● ● ●
Constant electronic control ● ● ● ●
Restart protection ● ● ● ●
Soft start ● ● ● ●
KickBack Control ● ● ● ●
Run-out brake – – – ●
Drop Control – – – ●
Weight
B)
kg 2.2–2.5 2.2–2.5 2.2–2.5 2.3–2.6
Protection class
/ II / II / II / II
A) Rated no-load speed for the selection of appropriate application tools in accordance with ENIEC62841-2-3. The actual no-load speed
must not exceed the rated no-load speed and is therefore lower.
B)
Depends on protective guard((12), (11), (13)) and auxiliary handle((8), (9)) in use
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-
specific models.
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit
www.bosch-professional.com/wac.
Angle Grinder GWS 17-125 PS GWS 17-150 PS GWS 17-125 PSB
Article number
3601GD13.. 3601GD16.. 3601GD17..
Rated power input W 1700 1700 1700
Power output W 1010 1010 1010
1 609 92A 99S | (24.01.2024) Bosch Power Tools